Making Power Work for You

WM2-Series 208V-480V GLQC Tap Box

208V, 480V Portable Generator and/or Load Bank Quick Connection Tap Box

Home » Power System Products » Generator / Loadbank Quick Connection » WM2-Series Generator / Load Bank Quick Connection Tap Box


   Tap Box Information

The APT Generator Quick Connection Tap Box (WM2 Series) is designed to allow your facility to be emergency power ready by providing a quick and safe connection of a mobile generator set in the event of loss of power. Having an APT WM2 Series tap box pre-installed will eliminate much of the chaos as well as hazards that can be associated with connecting a temporary generator during a facility power loss.

   Standard Features

  • Wall-mountable
  • Rating:
    • 120-480V, 400 – 3200A
  • Max Dimensions*:
    • Height: 36″, Width: 30″, Depth: 16″
  • Silver plated copper bus with a 1000A/sq. in. current density connects the permanent facility load feeders to industry standard Cam-Lok® E1016 compatible receptacles
  • NEMA standard hole pattern for permanent facility side connection
  • Color coded, male Cam-Lok® E1016 compatible single pole receptacles with attached covers to connect customer supplied
    female Cam-Lok® E1016 cables from the tap box to mobile generator
    • A phase – Brown
    • B phase – Orange
    • C phase – Yellow
    • Neutral – White
    • Ground – Green

   Enclosure Features

  • UL® 50 Listed
  • Carbon steel NEMA Type 3R, for outdoor installation
  • Powder coated ANSI 61 gray
  • Corrosion resistant hardware
  • Pad-lockable front door
  • Integral lower flip door allowing access to connect the mobile generator cables
  • Bottom door mechanically interlocked with front door to prevent unauthorized access to receptacles when not in use

   Operational Features

  • Larger than 3200A load support
  • Mechanical lugs for permanent
    facility side connection
  • Circuit breakers
  • Kirk Key for interlocking with
    facility circuit breakers
  • Phase rotation monitoring
  • Call APT factory to discuss any
    site specific requirements you
    may have


See page 8 of the APT Generator/Loadbank Quick Connection Tap Box (WM2 Series) Brochure for more Generator Quick Connection Tap Box pricing information.