Padd Mounted Generator Load Bank Quick Connection Switchboard
The APT Generator Load Bank Quick Connection Switchboard (FS2-Series) is designed to allow quick and safe connection of a mobile generator set to facilities experiencing loss of power. The switchboard is rated Type 3R for outdoor installation. Permanent installation and connection of the switchboard to the facility power distribution system will minimize any unplanned power outages. With 208V, 480V, 600V, this portable generator quick connection (GQC) transfer switchboard is also suitable for Utility Service Entrance Equipment.
Wall/Pad Mounted Generator Load Bank Quick Connection Tap Box
The APT Generator Load Bank Quick Connection Tap Box (WM2-Series) is designed to allow your facility to be emergency power ready by providing a quick and safe connection of a mobile generator set in the event of loss of power. Having an APT WM2-Series tap box pre-installed will eliminate hazards that can be associated with connecting a temporary generator during a facility power loss.
Generator Loadbank Three Way Transfer Switchboard (Triple Switching)
This Generator Loadbank Triple Switching Quick Connection Switchboard eliminates introducing an additional point of failure to the utility power system for permanent generator connection. It is designed to allow quick and safe connection of a mobile generator set to facilities experiencing loss of power. The switchboard is rated Type 3R for outdoor installation. Permanent installation and connection of the switchboard to the facility power distribution system will minimize any unplanned power outages.
Pad Mounted Generator Quick Connect Switchgear
The APT Generator Quick Connect Switchgear (MF2-Series) is designed to allow quick and safe connection of either a medium or low voltage mobile generator set connected to a medium voltage step up transformer to facilities experiencing loss of power. The MF2-Series is ideal for facilities that require medium voltage (2.4kV to 15kV). The switchgear is rated Type 3R for outdoor installation. Permanent installation and connection of the switchgear to the facility power distribution system will minimize any unplanned power outages.
2.8kV-38kV Service Entrance Generator Quick Connect Manual Transfer Switchgear
This Medium Voltage Output Protection Switchgear features a Circuit Breaker Cabinet for use with Diesel & Gas Generators. It is easy to maintain and environmentally friendly. The GenProtectM-Series is 100% Air Insulated. Its remote controllable design increases operator safety. That also applies to its provision for connecting field grounding cables. You do not need to tape or boot field cable terminations. In addition, you get to choose generator protective relay functions for this switchgear.
208V-480V Service Entrance Generator Quick Connect Manual Transfer Tap Box
This product combines the functionality of the Switchboard and Automatic Transfer Switch. The APT Automatic Transfer Switchboard (ATSB) is an Insulated Case Circuit Breaker based load transfer switchboard used to integrate a generator set into your power distribution system, without continuous paralleling with the utility.
APT FS2-MT 208V-480V Service Entrance GQC Manual Transfer Switchboard Specification
208V - 480V Portable Generator Service Entrance GQC Switchboard Manual Transfer
208V, 480V, 600V Portable Generator Quick Connection Transfer Switchboard Suitable for Utility Service Entrance Equipment
